Safety Guidelines For Upkeep of Fire Dampers284143

Материал из OrenWiki
Перейти к: навигация, поиск

Fire Dampers are often passive fire protection systems which can be specially engineered in the way that it gets close if you have a rise in temperature to be able to stay away from the spread of fire.

Fire Dampers are used for avoiding fire, so proper steps needs to be taken for correct upkeep of these dampers. It is important to avoid the spread of fire which can be caused inside the ductwork as well as prevent transmission of flame where air ducts penetrate fire barriers.

Initially, proper testing should be carried out during the time of its installation which is operational testing ought to be done of fire damper to guarantee it is functional and there's full use of it as well becasue it is components, verification should be carried out that all the devices are placed properly in their spots, along with other important verifications. All this testing done should then be documented that has all more information concerning the fire damper and instructions regarding its installation.

Following your amount of 12 months of installing of fire and smoke dampers, it's important being inspected based on the National Fire Protection Standard and so the frequency should be every 4 years and 6 years for hospitals.


These activities must be performed during the time of inspection:-

1] The 165 degree fusible link where it's applicable ought to be removed for testing purpose.

2] All dampers should be operated to be able to verify they close properly and fully to avoid spread of fireplace.

3] In the event the latch has been provided of computer ought to be checked and moving parts lubricated if needed.

4] There isn't any interference due to rust, misalignment, damaged frames or blades, defective hinges or parts, or bent tracks needs to be confirmed.

5] All inspections done of fireplace and smoke dampers ought to be documented properly including the details like the location of inspection, date of inspection, inspector, and applicable deficiencies.

6] In the event the damper is not operating properly compared to the repairs shall begin without having done any delay.

Smoke dampers are intended for installation in ducts and air transfer openings which can be specially engineered to stand up to the passage of air and smoke. Other safety precautions which should be taken care of are:-

• It must be checked over a proper basis that the external pieces of each damper for indications of physical damage, obstructions preventing proper functioning, defective and missing parts, and proper labeling.

• Verification ought to be done about the proper sealing with the damper.

• Be sure that the damper is in a position close fully.

• There should be no blockage in the closure and must not penetrated by foreign objects since it affects fire damper operations.

• It ought to be ensured that if fusible link is damaged than being substituted for a hyperlink of the same size, temperature, and cargo rating.

Thus testing and safety precautions are important being done this regarding make sure that it functions at its best at the time of fire and life safety event where it's most significant to be effective. It is necessary for doing inspections regularly so the system is always ready because we don't know once the unexpected event will probably occur.